late80s 90s Quicksilver remote drawing /parts list.

[James R]

I need to replace the narrow cover on the rear of the unit that covers and secures the cables. Can anyone point me in the right direction please.

 

[MH Hawker]

Re: late80s 90s Quicksilver remote drawing /parts list.

A picture of the controller would help due to the many styles that are made.

 

[James R]

Re: late80s 90s Quicksilver remote drawing /parts list.

Thanks for the response.
Now to try to put the pics up.

 

[carholme]

Re: late80s 90s Quicksilver remote drawing /parts list.

That looks like a Commander 2000. Here is a link to several which you can take a look at for the piece you require.

ACCESSORIES REMOTE CONTROLSVOLUME 2 - Mercury, Mercruiser, Force, etc. Parts Lookup

Gerry

 

[James R]

Re: late80s 90s Quicksilver remote drawing /parts list.

Thanks carholme/Gerry.
Now I sseeesit.
Jim.

 

[MH Hawker]

Re: late80s 90s Quicksilver remote drawing /parts list.

Yes that is a commander 2000 I have the same exact one. I would suggest you order the screws # 7 and the shift lock piece # 6 while your at it. The screws are put in with lock tight and often the heads get messed up when removing and the shift piece is prone to cracking.

 

[James R]

Re: late80s 90s Quicksilver remote drawing /parts list.

Thanks again Guys. I am lucky that I always use an impact screw driver to remove the screws in controls. They usually come out without damage. In these applications I use OMC thread sealer instead of thread locker and the screws stay in and come out easily when required.