Loose throttle......

[Gradywhite3535]

Whenever I'm out on the water I've been noticing the throttle seems to be loose and moving forward. Is there any adjustments to make it loose or tight? Thanks

 

[99yam40]

yes there should be a tension screw on the controler

 

[boscoe99]

Too bad the type of throttle is not known.

 

[Gradywhite3535]

It's a 2003 yamaha txrb 130. I tried uploading a photo of the controller but it's not working. Ard the screws you are talking about under a black rubber circle? I remember seeing two screws there. Thank you

 

[99yam40]

motor model does not have any bearing on the controller model

have a look around for 703 and 704 to see if those might be what you have

 

[Gradywhite3535]

Just took a look at my manual for the control lever that I forgot I had and found the directions. Is The throttle opening adjustment on the control lever out it in forward or reverse closer/further?

 

[99yam40]

Just took a look at my manual for the control lever that I forgot I had and found the directions. Is The throttle opening adjustment on the control lever out it in forward or reverse closer/further?

Sorry but that question does not make any since to me