whats the right way to change the lower unit oil on a 1984 evinrude 8 hp
90F1504x4 Cadet Joined Mar 29, 2010 Messages 15 May 9, 2010 #1 whats the right way to change the lower unit oil on a 1984 evinrude 8 hp
E ezeke Supreme Mariner Joined Sep 19, 2003 Messages 12,532 May 9, 2010 #2 Re: lower unit oil change Same as most OMC outboards: fill from the bottom until it runs out the top; plug the top then the bottom; use new seals; keep the unit in the running position and don't overfill; leave the phillips screw alone. http://forums.iboats.com/showthread.php?p=2049494#post2049494
Re: lower unit oil change Same as most OMC outboards: fill from the bottom until it runs out the top; plug the top then the bottom; use new seals; keep the unit in the running position and don't overfill; leave the phillips screw alone. http://forums.iboats.com/showthread.php?p=2049494#post2049494
Vic.S Rear Admiral Joined May 4, 2004 Messages 4,720 May 9, 2010 #3 Re: lower unit oil change leave the phillips screw alone. Click to expand... Happliy there isn't one on this engine! Just the drain/fill screw and the level screw. PS it takes 325 ml ( that's 11 fluid ozs in old world units)
Re: lower unit oil change leave the phillips screw alone. Click to expand... Happliy there isn't one on this engine! Just the drain/fill screw and the level screw. PS it takes 325 ml ( that's 11 fluid ozs in old world units)
