Mass Air Sensor

Bamby

Seaman
Joined
Jun 11, 2008
Messages
57
I have a 03 Chevy pick up. Since its 5 years old thought I should go ahead and check the plugs and wires. Pulled all the plugs and checked them to observe if all was good. Couldn't find anything wrong there at all but the truck though running good seamed sluggish. Continued to look at things and the mass air sensor was sort of dirty and cleaned with some carb cleaner. Boy what a difference that made runs like new again. So if any of you feel your vehicle is running sluggish maybe this is something you should look at. Sure is a easy fix to the situation.
 

Xcusme

Commander
Joined
Apr 21, 2003
Messages
2,888
Re: Mass Air Sensor

Right, just be careful WHICH cleaner you use....some destroy the sensor straight away.....;)
 

Splat

Lieutenant
Joined
Jul 20, 2008
Messages
1,366
Re: Mass Air Sensor

Right, just be careful WHICH cleaner you use....some destroy the sensor straight away.....;)

Beat me too it.

Typically a cleaner labeled as electronic cleaner is safe. DO NOT USE CARB CLEANER it will destroy the sensor, and cause the plastic to become brittle and explode.

Bill
 

JustJason

Vice Admiral
Joined
Aug 27, 2007
Messages
5,321
Re: Mass Air Sensor

they do make mass airflow sensor cleaner!!!! But i've used CRC electrical contact cleaner without a problem.
 

dolluper

Captain
Joined
Jul 19, 2004
Messages
3,904
Re: Mass Air Sensor

Give it a shot with the wooden end of a hammer if the engines stumbles IT"S WORKING RIGHT...insept inside and clean if needed
 

ne7800

Lieutenant Junior Grade
Joined
Jul 10, 2008
Messages
1,195
Re: Mass Air Sensor

This reminds me of a friend when i noticed his check engin light was on he just chuckled and said "Yeah i opened the hood and checked and it's still there so not sure why it's on"
 
Top