Greetings, new to boating and already dead in the water! just bought 86 mercury 45hp 4 cyl s/n A948658 running w/ auto blend. Ran great first time out. Took it home replaced some wires that were coroded, cleaned tanks(full of debris and water). Started with great difficulty (lots of cranking) idled rough (coughing) will not come up to speed under load. Suspected debris/water in carbs, removed replaced all seals diaphrams, float valve ... changed bulb, lines and filter. No change runs good at 1/4 throttle, rough at idle (dies easy after a cough) and will not run full throttle and is a bear to start unless warm. Tried to run a 50:1 mix in stead of using auto blend, no different. On top of that my wife is loosing patience with my new project. help!