metal Tanks for OMC single hose motors

[belairbrian]

So do they exist? Seems everything I find online is for the 2 hose pressure system.

 

[Howard Sterndrive]

Re: metal Tanks for OMC single hose motors

yes. I have had several over the years.

 

[F_R]

Re: metal Tanks for OMC single hose motors

So do they exist? Seems everything I find online is for the 2 hose pressure system.

Are you serious? ebay is full of them. search for (evinrude, johnson, ) gas tank

 

[belairbrian]

Re: metal Tanks for OMC single hose motors

Are you serious? ebay is full of them. search for (evinrude, johnson, ) gas tank

Nice attitude, A guy ask a question and you respond with a SA remark. As I said I all I found searching (including EBay) were dual line.

Maybe I don't know what I should be looking for, but your response was of no help except to up your post count by one.

 

[belairbrian]

Re: metal Tanks for OMC single hose motors

So here is an example of my confusion. This is listed as a pressure tank but looks like what I would think is a single line vented tank.

http://www.ebay.com/itm/VINTAGE-JOHNSON-GAS-TANK-MOTOR-BOAT-OLD-PRESSURIZED-MARINE-OMC-5-GALLON-DECENT-/261079329372?pt=LH_DefaultDomain_0&hash=item3cc98a6a5c

 

[nwcove]

Re: metal Tanks for OMC single hose motors

should be way easier to find a single line steel tank than a pressure tank. i have two single line omc steel tanks, and saw two new tanks at one of the local brp dealerships ( nos) the one in the link you provided is not a pressure tank!! it is a single line tank.

 

[JimS123]

Re: metal Tanks for OMC single hose motors

Most people don't have a clue about what they are talking about. Just look at the picture. As previously stated, the tank in your link is the one you are looking for. The guy didn't know what a pressure tank was.

They don't make them any more. Very little NOS left. Just look on E-bay and get the one in the picture.

 

[F_R]

Re: metal Tanks for OMC single hose motors

Nice attitude, A guy ask a question and you respond with a SA remark. As I said I all I found searching (including EBay) were dual line.

Maybe I don't know what I should be looking for, but your response was of no help except to up your post count by one.

There was no attitude intended. I was just pointing out that they are very available. However getting flamed for trying to help doesn't encourage me much. Why do I bother? Try to help 16,000 + people and see what I get?

 

[Mi duckdown]

Re: metal Tanks for OMC single hose motors

I'm with F_R. Don't get the SA remark.??????

 

[pecheux]

Re: metal Tanks for OMC single hose motors

I'm with F_R. Don't get the SA remark.??????

Count me in ... I'm with F_R also. Cant see the SA wording ?????