Reel Appeal
Chief Petty Officer
- Joined
- Aug 19, 2002
- Messages
- 566
Hello,<br />This may belong in boat questions,not sure.I was hoping others could share their ideas's for thoroughly mixing 2 cycle oil into a large fuel tank.I'am always concerned that the oil is not mixed thoroughly enough with the gas on non-VRO systems.I have an 85 gal.below-deck tank.I would usually pour the oil slowly into a large funnel while pumping the gas.I've seen some put oil into the below deck tank first,then fill with gas.Is there a better way to assure a thorough mix? 