Molded Hoses for FWC System

[FreeBeeTony]

WHere can I find the p/n's for specific molded hoses for my FWC system?

 

[Don S]

Re: Molded Hoses for FWC System

Depends on a lot of things, what type manifolds you have, if it's a full system or half system, is it OEM or after market heat exchanger, which hoses it is, what type thermostat housing you have etc.
Pictures would be worth at thousand words in this case, because I know your engine is not OEM.

 

[FreeBeeTony]

Re: Molded Hoses for FWC System

Thanks Don......Its OEM except for the Vortec heads and manifold. It's a full system.
I am looking for the raw water hose coming from the P/S cooler......

I can't find a parts list for the full FWC system. S/N starts with 0Dxxxxxx

 

[stonyloam]

Re: Molded Hoses for FWC System

Is it here? http://www.mercruiserparts.com/Show...inbr=978&bnbr=120&bdesc=Closed+Cooling+System

 

[FreeBeeTony]

Re: Molded Hoses for FWC System

It's close Terry.............but not exactly.........

 

[Don S]

Re: Molded Hoses for FWC System

There are 7 different closed cooling systems in the accessory section. Might give a look at each one and see if it's what you have.

http://www.mercruiserparts.com/selectDocs.asp?doc_nbr=4200093D

 

[FreeBeeTony]

Re: Molded Hoses for FWC System

Thanks Don...........need to take a closer look at these.