AlabamaJohn
Recruit
- Joined
- May 15, 2004
- Messages
- 3
I took the prop off my '67 merc 200 20hp and found a lot of broken stuff the ring that holds everything in and the bearing carrier were both badly cracked so I got new ones of both the only problem is that the carrier won't go in deep enough to clear the threads so I can screw on the ring the motor is old and all the threads that where between the ring and the prop were worn away but the ones that the old ring were screwed into are still there. if I take the shaft and bearings out of the motor the carrier goes back far enough to get on the ring. So any help guys??what am I doing Wrong???