need help with a 1986 force 50hp motor

[thads king]

hi guys i found my problem with the no cranking or spark on my force 50hp but when i orderd the part i got a round tube about an inch long with two screws in it but i needed a piece about 2 or 3inches long with two screws in the end and two screwsw in the middle p/n should be 87f84449 which is a neutral safety swich is that the replacement part

thanks thad

 

[foodfisher]

Re: need help with a 1986 force 50hp motor

Deal with them them. Not much we can do with a faulty order.

 

[thads king]

Re: need help with a 1986 force 50hp motor

trying to tell if the style of the neutral safety swich was changed thats all

 

[foodfisher]

Re: need help with a 1986 force 50hp motor

Don't get upset, we're here to help. Some are more versed in specific engines than others. I personally have no knowledge of your engine so my reply was based soley on your wording in the OP. You didn't ask a specific question so I replied as though you were just venting about a fouled up order. Well chosen words will elicit quality responses. You said you got a tube w/two screws in it, my initial thought was, so what.

 

[roscoe]

Re: need help with a 1986 force 50hp motor

87F84449 is the correct and current part number for Mercury parts.

If you ordered from a Mercury dealer, they should have sent you the correct part.

If you ordered form a non dealer, maybe they sent you an aftermarket switch that they thought would work.

Or, maybe someone just grabbed the wrong part while pulling the order.


Crowleymarine dot com in Denver is your online Merc dealer.

 

[jerryjerry05]

Re: need help with a 1986 force 50hp motor

What you ordered and what you got????
A few pics will help a TON!!!
Sometimes(unless actually broken) a bit of WD-40 can free it up.Again pics!!
Looking up the part# doesn't always show a pic.