Need prop help 24' & 70hp

[flotebote24]

NEWBIE HERE AND NEED PROP HELP. I HAVE A 24' HARRIS PONTOON WITH A 70hp JOHNSON. THE OLD PROP IS TO CORRI-ED AND I CAN NOT READ THE MARKINGS ON IT. I THINK IT'S ABOUT 13.5" IN DIAMETER FROM LAYING IT DOWN AND TRYING TO MEASURE IT. I JUST NEED A PROP TO POCK AROUND AND ALSO TO GET TO PLAN AN JUST NORMAL RUINING. NOT MUCH INFO THE GO ON SO ANYTHING CLOSE WOULD HELP.

THANKS IN ADVANCE
GARY B

 

[hwsiii]

Re: Need prop help 24' & 70hp

Look under the prop nut, and if you can't find it there bring it to a prop repair shop and they can tell you exactly what it is.



H

 

[flotebote24]

Re: Need prop help 24' & 70hp

I have tried to see what it says on the prop but it's not readable, even sprayed rust and corrision remover on it and no good. Will see if I can find a prop replair place close by.

Thanks

 

[hwsiii]

Re: Need prop help 24' & 70hp

Let us know when you get the pitch of the prop and your WOT RPM and GPS speed and we will help as much as we can.



H