No start after engine install. Need Help!!!

ESGWheel

Senior Chief Petty Officer
Joined
Aug 29, 2015
Messages
665
Nice pic but he has a TBV
Roger that. The point of the post was around the TBV and how the testing process needs to be different fm TBIV so was trying to mockup the TBV to show why. I could not find a wired up TBV pic readily so stole with pride fm another post :)
 

jonny rotten

Petty Officer 1st Class
Joined
Jan 8, 2012
Messages
377
IT RUNS!!! I disconnected the tack wire from coil and tack to test. I also spread the ground pin open on the harness. In my haste I forgot to put the coil wire back on while testing each thing. So I'm not sure if it was a crusty connection at the tack (unlikely because it clean) or the ground. After I spread the pin I could swear I heard electric spark sound connecting the harness. So I'm going with a bad ground connection in the main harness. Something I would have never looked at if it wasn't for this forum. Can't thank everyone enough for taking the time to help. The best part is that I didn't do something wrong during the install which is good to know lol
 

Attachments

  • 20250525_111634.mp4
    19 MB · Views: 0
Top