not firing on all 4 cylinders

[gekobvc]

I have a 125 hp force engine and i cant seem to get it to fire on all 4 cyl. ive changed the coils on #1&3 cyl, and checked the compression on all Im getting 140-150 psi on all 4.with all new plugs ive fired it up and still no ignition on #2 ?????????????

 

[lonewolf5347]

Re: not firing on all 4 cylinders

check the stator with a meter set to ohm's.

 

[gekobvc]

Re: not firing on all 4 cylinders

thanks capt. but forgive my ignorance are there 2 leads commomg from the stator that have to be un-plugged and then tested with my ohms meter?

 

[lonewolf5347]

Re: not firing on all 4 cylinders

on that 125hp. let me know what year it is. ? there are 4 wires from the stator.if you don't have a meter you can swap wire's to trouble shoot the system.c-d module on that system feeds 1@2 @ other unit feeds 3@4 .the stator wire in color are either brown @ blue or yellow @blue.should be connected to a terminal stud bar.if you swap wire on the stator @ still no spark on # 2 cylinder ,then it not the stator.if you swap wires on the trigger @ still have no fire on # no 2 it not the triggers.then i would say it your c-d modular.e-mail for more info lonewolf5347@cs.com