omc cobra 1993 ford 5.0 upper case water plug

john demint

Recruit
Joined
Jul 9, 2009
Messages
5
I am learning as I go about a recently purchased 1993 Four Winns with Ford 5.0/ OMC Cobra. I was attempting to check outdrive oil and pulled the port side plug on the upper case, it is for the water tube for cooling. Trouble is when I pulled it out I could see the nut floating inside the case and can't replace the plug. Any Ideas?
 

Idlespeedonly

Senior Chief Petty Officer
Joined
Jun 30, 2011
Messages
779
Re: omc cobra 1993 ford 5.0 upper case water plug

pull the outdrive and fix it.
 

john demint

Recruit
Joined
Jul 9, 2009
Messages
5
Re: omc cobra 1993 ford 5.0 upper case water plug

I've pulled the outdrive off of mercruisers, this looks the same... anything I should be aware of on the OMC Cobra?
 

Idlespeedonly

Senior Chief Petty Officer
Joined
Jun 30, 2011
Messages
779
Re: omc cobra 1993 ford 5.0 upper case water plug

Nope. Check the bellows and grease the joints and splines. Be sure to use a new gasket .
 

DBreskin

Senior Chief Petty Officer
Joined
Oct 20, 2009
Messages
799
Re: omc cobra 1993 ford 5.0 upper case water plug

When pulling the drive the gearshift should be in neutral.
 
Top