bluebear57
Petty Officer 3rd Class
- Joined
- Mar 12, 2011
- Messages
- 76
Hey guys I need your help again you’ve helped me so many times before I know what people would do without you guys the shop so I have around here I have no idea what is going on so I thought I would check with you guys I have a mariner 150 1989 I’ve had for years start to get an overheating problem and I damaged one of my cylinders number two ordered new piston new rings had a reboard put all back together and that same cylinder still gets too warm I have done everything all new gasket sets complete new water pump housing impeller everything new thermostats without thermostats water flow is great but it idle it will shoot 120: 302 I took thought maybe carburetors were running Tulane took them off clean them they were fine but I’m all back on bottom carburetor had a bad needle valve replace that put it back together and it starts easier than it’s ever done before since I’ve owned it but it’s still getting instead of getting hot now I’m just a number two cylinder it gets hot all over and I don’t know what else could be causing that heating problem it runs great I know you guys are help me before with nobody else good I was asking for a big sauce jacket gaskets I just replaced all those a while back I have no im at my wits end why it would overheat with all that water running through it poppet valve looks good like brand new I just I’ve been working on it for over a year with my health problems I would like to go to the lake and fish with it but I can’t I can’t get it to keep running cool so any ideas we greatly appreciate you guys thank you much