Part number Info?

[andy6374]

Evinrude model # E150TXCEM.<br /><br />I was just looking at the online BRP Part Catalog and it is giving me blank pictures, so there site must be down for the time being.<br /><br />Anyone know the part numbers of the two jet plugs (not the jet itself) on the bottom of the fuel bowl of the carbs. There is one silver and one gold plug/screw on each side of the fuel bowl. The silver screw is longer than the gold.<br /><br />Thanks-<br />andy

 

[OBJ]

Re: Part number Info?

PN 327116 Andy.<br /><br />EDIT: Just tried the BRP site and found the part. Holding yer tounge right Andy....

 

[andy6374]

Re: Part number Info?

Yeah, I just tried it again and it worked. Duh.<br /><br />However, on the my carbs there are two plugs on each side of the float chamber. What's the deal?

 

[andy6374]

Re: Part number Info?

I mine I see two sets of jets on either side of the float chamber. I presumed that on either side, that one was a high speed jet and the other was a idle jet.

 

[andy6374]

Re: Part number Info?

I will try and post a picture of the carb. tonight to help solve this problem

 

[OBJ]

Re: Part number Info?

If the plugs are overtop of each other, sounds like the carbs were swapped out for older carbs. The plugs were on the pre-83' carbs. Check out the carbs on an 82' 150 on the BRP site.

 

[andy6374]

Re: Part number Info?

You got it OBJ. I found the that the 1979 150 matches my carb. Thanks a bunch. I would have gone insane.<br /><br />-andy