Parts Breakdown KH-7 Antique Mercury

[Yepblaze]

Anyone out there that can scan a parts breakdown of a KH-7 and email it to me/ I would sure apreciate it. I'd buy a manual but this is a low budget operation. I need to get into the tiller gears among other things.

 

[steelespike]

Re: Parts Breakdown KH-7 Antique Mercury

Go to Johns Old Mercury Web Site at:<br /> www.pfs-ware.com look around there are links<br /> and a Q/A board.<br />Also try Barfitups Mercury Outboard resource Site at: www.merlincorp.com/~barfitup.<br /> Watch ebay for parts.

 

[Bear]

Re: Parts Breakdown KH-7 Antique Mercury

Try this:<br /> http://www.dolleroffshore.com/parts.cfm?c=mv&m=7 <br />

 

[Chinewalker]

Re: Parts Breakdown KH-7 Antique Mercury

For about $10.95 you can get the entire parts list from Grubb's - www.oldmercs.com, part # 90-26117.<br />- Scott

 

[Yepblaze]

Re: Parts Breakdown KH-7 Antique Mercury

Wow bear what a great resource. Too bad it's not showing the 1954 KH-7. Mine has the twistgrip throttle. Perhaps a Mark 10 or 20 is similar.

 

[Chinewalker]

Re: Parts Breakdown KH-7 Antique Mercury

Hi Blaze,<br /> It's not showing the 1954 KH7, because they only made it in 1952. The Cruiser was a transition motor as the Hurricane powerhead evolved from the tank-on-top/direct-drive to the seperate-tank/full-gear-shift motor of 1953's Mark 20. Your motor shares a great deal with the Mark 20, and shows up with the Mark 15/Mark20 parts listing.<br />- Scott