PEE HOLE

[STEVE YAWN]

I CAN NOT GET WATER OUT OF THE PEE HOLE. HOW CAN I CHECK TO SEE IF IT IS PLUGGED? PLEASE HELP!<br />STEVE

 

[rodbolt]

Re: PEE HOLE

hello<br /> well give it a better brand of beer.<br /> coors makes me wee like a toad.<br /> if you tell me what year and horse power ya got I may be able to assist even more. I hope this helps.<br /> good luck and keep posting

 

[STEVE YAWN]

Re: PEE HOLE

Its a DT25 (25hp) 1993<br />Thanks

 

[bossee]

Re: PEE HOLE

Hi,<br />Suzuki DT25 then? Right?<br /><br />I had a Suzuki DT65 before and I once had clogged telltale tube. So I used a thin piano-wire thin enough to go into the hole (while running the outboard with a garden house and muff on outboard water intakes) and sure it was mud and sand in the tube, and after cleaned it came a steady stream of water as expected. After I cleanded the tube all was fine as long as I had this outboard.<br /><br />Hope it helps.

 

[rodbolt]

Re: PEE HOLE

hello<br /> I willhave to doublecheck. but I think the tell tale on that motor is a channel in the power head adaptor. some become so clogged the only way to clean them is to remove the power head.<br /> try to use a piece of stainless leader wire and push back into the hole. I also use carb cleaner and the red tube. but if nothing else works you may have to live without it or remove the power head for cleaning. if I find anything to the contrary at work tomorrow Ill post ya back. we have a junk one there I will look at

 

[STEVE YAWN]

Re: PEE HOLE

Thanks Rodbolt. You were 100% right. I had to take the power head off and thoroughly clean the water channels and also the tell-tale channel. I will let you know how everything turns off.<br />Steve