power tilt and trim

justmop

Cadet
Joined
Jan 16, 2012
Messages
15
i have a 1985 85hp forces motor.. when i am running my trim doesnt stay up .. i know some motors have a screw that releases the trimso it stays down i dont know if this motor has it or not.. i dont see any fluid leaking any where ...
 

64osby

Admiral
Joined
Jul 28, 2009
Messages
6,826
Re: power tilt and trim

You may have tilt only, not trim. Hard to tell without more info.

I have an 85 Johnson that has tilt only, it will not hold the motor up if I go faster than idle. It's not made to hold against the pressure.
 

H20Rat

Vice Admiral
Joined
Mar 8, 2009
Messages
5,204
Re: power tilt and trim

When the boat is parked, will the motor stay up when you raise it up?
 

justmop

Cadet
Joined
Jan 16, 2012
Messages
15
Re: power tilt and trim

it has 3 pistons .. and no it take time for it to go down
 

justmop

Cadet
Joined
Jan 16, 2012
Messages
15
Re: power tilt and trim

the first time i took it out this year it went up and stayed up for about 15 mins then i slowed down and it only went up and stayed up at low rpm
 
Top