Prop rubbing Gearcase

[scottsims]

I have an aluminum prop that I hit on a log and bent one of the blades very slightly. i mean no onewould notice it unless it was pointed out.<br /><br />Performance hasn't changed at all either. But I noticed the other day while cleaning the motor and prop that when I turn the prop at one small area during the full turn there is some slight rubbing.<br /><br />Is this cause for concern? Is it likly that the prop is warped more than I can see with eye causing this?<br /><br />Thanks,<br />Scott

 

[tommays]

Re: Prop rubbing Gearcase

I would pull the prop and check if the shaft was bent in the inpact<br /><br />You would need a dial indicator or have to borrow one to check it<br /><br />If you keep running with rubbing it will cause much worse dammage<br /><br /><br />tommays

 

[rickdb1boat]

Re: Prop rubbing Gearcase

Also, check your lower unit lube to make sure it doesn't have water in it.......Might have messed up the seal...