Quick wiring question

[anthony1]

have a boat that all the wires were cut out... i have attached the photo here in the post.
I have most of the motor part figured out.. however ....
i am not 100% sure what port number the wires for the ignition , safety , and voltmeter belong to... and the diagram is not a tellin...
does anybody know ?
http://www.marinemechanic.com/site_image/TBOLT-IV-WIRING.gif

 

[Bt Doctur]

do you need the dash wiring side ? Where were the wires cut?

 

[alldodge]

have a boat that all the wires were cut out... i have attached the photo here in the post.
I have most of the motor part figured out.. however ....
i am not 100% sure what port number the wires for the ignition , safety , and voltmeter belong to... and the diagram is not a tellin...
does anybody know ?
http://www.marinemechanic.com/site_image/TBOLT-IV-WIRING.gif

Your not saying what motor and year your working with so here is one, there are others
http://www.boatfix.com/merc/servmanl/13/13e4r2.pdf

 

[anthony1]

do you need the dash wiring side ? Where were the wires cut?

Yes...

 

[anthony1]

Your not saying what motor and year your working with so here is one, there are others
http://www.boatfix.com/merc/servmanl/13/13e4r2.pdf

mercruiser 1990 5.7 - shes in a bayliner carpi
I have the motor wiring diagram that i posted above....
I can pretty much guess which ones go where but i would hate to make a mistake. The wires were cut all at the fuse block... makes no sense at all why they cut them.....

 

[DeepBlue2010]

Looks like a Mrs got really pissed off at the captain when she found out he is sleeping with another boat

 

[alldodge]

This is typical boat wiring

 

[Fishermark]

Hey AllDodge - that's one of the best generic wiring diagrams I have ever seen. Very easy to follow. Nice!

 

[alldodge]

Copied it from another thread some time back, forget from whom

 

[Fishermark]

Here's a pic from Mercruiser Manual 15 for the dash wiring: