REMOVAL OF CONNECTING ROS FROM CRANK

[David Sullivan]

1989 YAMAHA 40 HP ENDURO, HOW DO YOU REMOVE THE RODS FROM THE CRANK, I AM USED TO EVENRUDES<br />THIS IS TOTALLY DIFFERENT. THANKS FOR ANY REPLIES

 

[Ray Neudecker]

Re: REMOVAL OF CONNECTING ROS FROM CRANK

Motorcycle type crank. Crank was pressed together with rods in place. Basically non servicable. Later models were built with the rods bolted on.

 

[rodbolt]

Re: REMOVAL OF CONNECTING ROS FROM CRANK

hello<br /> those cranks are normally repairable. call ackermann marine in wilmington NC. last one they did for me works well. all new bearings and 2 rods set me back about 400. on a 3 cyl suzuki<br /><br />good luck and keep posting

 

[mrn714]

Re: REMOVAL OF CONNECTING ROS FROM CRANK

Hey rod, I got good service from thoes guys as well.