tfmech
Seaman
- Joined
- May 17, 2011
- Messages
- 69
I have a 82 Hydrostream Vulture that I am putting a 89 GT150 on till I get done with the 2.6 XP for it. I am going to be running a electric fuel pump and deleting the VRO pump. When I do this is there anything else I can delete off the motor to unclutter I basically just want the ignition, choke, starting and charging system still working. I am going for speed, the boat is was already setup for a 200 Horse merc so it has all the go fast goodies on it, jackplate, trim on the wheel, good dual cable, hot foot, extra knees and a lot of aluminum bracing for the transom.
Second I am putting new lines on the carbs as they were all rotted question is what line do I need to use to replace the choke primer lines and the balance lines on the carbs, The stuff that is on it looks like vacuum line but I am guessing it is something special to handle fuel and oil? Can I use Tygon or Polyurethane?
Thanks for the help
Second I am putting new lines on the carbs as they were all rotted question is what line do I need to use to replace the choke primer lines and the balance lines on the carbs, The stuff that is on it looks like vacuum line but I am guessing it is something special to handle fuel and oil? Can I use Tygon or Polyurethane?
Thanks for the help
Last edited: