Hello I am new to this site and a proud new I/O owner. I have a 04 Glastron gx 185 with 4.3 volvo penta sx. It runs out very well but I read that it is only supposed to go to 4500 rpm. With throttle wide open and trimmed and 3 200# guys I was running about 48-50 mph and 5500 rpm's. I have a 14 1/2 23 rt prop. My oil pressure and temp never seems high and the engine does not sound like is over reving.
Am i supposed to manually limit my rpms or is it the prop that is causing this?
Also I just had the prop rebuilt ( hit a stump first time out and took out a very small section of one blade. less than 1/4") and it is now running slower than what it was before and rpm are about 100 higher. why is this? The only other thing that I had done was a new gimble bearing and boot both placed by a vovlo repair place. Last year I was running 53-58 mph.
Thanks for your time and Please help so I do not inflict more pain to my wallet.
Am i supposed to manually limit my rpms or is it the prop that is causing this?
Also I just had the prop rebuilt ( hit a stump first time out and took out a very small section of one blade. less than 1/4") and it is now running slower than what it was before and rpm are about 100 higher. why is this? The only other thing that I had done was a new gimble bearing and boot both placed by a vovlo repair place. Last year I was running 53-58 mph.
Thanks for your time and Please help so I do not inflict more pain to my wallet.