Selecting a replacement Prop

BornBlue82

Seaman
Joined
Feb 11, 2013
Messages
59
Re: Selecting a replacement Prop

Here is a picture of the prop. It's not really that bad, I just wanted to upgrade.
IMG_20130530_101508_930.jpg
 

SkiDad

Lieutenant Commander
Joined
Jul 18, 2010
Messages
1,518
Re: Selecting a replacement Prop

yeah that is not real bad - so you are probably getting true rpm reading. So your 20 is probably that safe bet as I bet the 19 would over-rev. slightly Just something you want to avoid as a new boater.
 

BornBlue82

Seaman
Joined
Feb 11, 2013
Messages
59
Re: Selecting a replacement Prop

yeah that is not real bad - so you are probably getting true rpm reading. So your 20 is probably that safe bet as I bet the 19 would over-rev. slightly Just something you want to avoid as a new boater.

OK so a 20/4 blade. What about 21/4 blade. Just curios to know what the difference is.
 

SkiDad

Lieutenant Commander
Joined
Jul 18, 2010
Messages
1,518
Re: Selecting a replacement Prop

what did you end up getting ? Let us know your results :)

PS - i just picked up a used stainless prop - first one.
 

Bamaman1

Lieutenant Commander
Joined
May 15, 2011
Messages
1,895
Re: Selecting a replacement Prop

I used to go thru an aluminum prop per year on my inboard outboards. When I switched to stainless, I got 10 years without a scratch--until the engine blew. In the long run, a stainless prop can be a great value.

Getting back to props: If you have a good prop shop around, go shopping there. His advice will be free if you buy from him, and he may allow you to return the prop if it's the wrong one for your boat.

I would think for general running, a 21 pitch 3 blade would be your best prop. I always had a 2" lower pitch prop I'd install for the day if pulling heavier skiers.
 

BornBlue82

Seaman
Joined
Feb 11, 2013
Messages
59
Re: Selecting a replacement Prop

what did you end up getting ? Let us know your results :)

PS - i just picked up a used stainless prop - first one.

I haven't pulled the trigger just yet. Still shopping around. I will post as soon as I get one.
 

BornBlue82

Seaman
Joined
Feb 11, 2013
Messages
59
Re: Selecting a replacement Prop

I used to go thru an aluminum prop per year on my inboard outboards. When I switched to stainless, I got 10 years without a scratch--until the engine blew. In the long run, a stainless prop can be a great value.

Getting back to props: If you have a good prop shop around, go shopping there. His advice will be free if you buy from him, and he may allow you to return the prop if it's the wrong one for your boat.

I would think for general running, a 21 pitch 3 blade would be your best prop. I always had a 2" lower pitch prop I'd install for the day if pulling heavier skiers.

Thanks for the advice. I haven't looked for a prop shop around here but, that sounds like a great Idea. Thanks again.
 
Top