She's got some rot

[DeepBlue2010]

Fort Wayne. Do most boating at Salamonie

All Evercoat products that has the word "Boat Yard" on them are finishing resins (they have wax added to them). You need laminating resin. If you are going with Evercoat, the part numbers for their laminating resins are

Evercoat # 100560 (Gallon)

Evercoat # 100560 (Quart)

I have to say, I never found these products any where near the price you posted ($20/Gallon) but if you can find them for this price and the lot is not very old (Check the lot number with Evercoat customer service just to be sure) go for it.

Mod EDIT: Iboats now sells resins, please don't post competitor info, links, and etc
http://www.iboats.com/Fiberglass-Ep...9587278--session_id.738298322--view_id.217324
Thanks​

.

best of luck to you on your project

 

[DeepBlue2010]

JB, these were "local" physical stores for him, not online stores like iBoats. The point was to avoid shipping cost and Hazmat charges.

 

[Swimforshore]

http://www.iboats.com/Boat-Yard-Pol...497154--session_id.922463627--view_id.1183457
This is the hi-bond poly. I misquoted price though I was looking at the quart instead of gallon. I'm not even real sure where to look locally

 

[DeepBlue2010]

I sent you a PM.

 

[Swimforshore]

A few pics of what I'm dealing with. Right now I'm starting to collect supplies and finish up some house projects. Planning on starting boat repairs this fall. I will post more pics and update on supply cost

 

[Swimforshore]

Ok so with Labor Day behind us I finally have the boat home. Space is at a real premium in my 2 car garage. The admiral says she is not parking outside this winter so I need to get this behemoth off the trailer. Anyone have an idea in him to build something to make this easy. I would like to have a stand with casters so I can move it a little

 

[Corjen1]

Ok so with Labor Day behind us I finally have the boat home. Space is at a real premium in my 2 car garage. The admiral says she is not parking outside this winter so I need to get this behemoth off the trailer. Anyone have an idea in him to build something to make this easy. I would like to have a stand with casters so I can move it a little

I made this one first....it worked OK, until I put the top cap back on...then the end bulkhead failed....



I remade the base structure out of 4x4's and it supported the rest of the build, right up until the boat met the trailer for engine installation.