Fastatv
Petty Officer 1st Class
- Joined
- Sep 28, 2013
- Messages
- 258
I have a 1989 Larson, 3.0 four banger, SE106 outdrive, which I'm sure is a re-manned Mecruiser. Anyway, I drained the water from the block and manifold the other day....was rare for here, but supposed to be 26 degrees, East Tn. So, today I take it out....78 degrees. Runs like a champ, but when checking to make sure my hoses and drains were tight, I noticed water in the bilge...which it never had before. So I noticed there is a "weep" hole, just to the right of the fresh water inlet ( fresh water cooled ), looking from the inside of the boat, slightly on the port side, almost center of transom, and water is coming in from this weep hole....only when running. Need some help help/guidance on what to do. Boat still runs at 140 degrees, and still runs great. Help! Thanks!