Hi<br />Brought my old DT40 out of storage on the weekend. Changed the plugs, new gas etc and launched.<br />After letting the motor warm up (5 minutes) headed out into the lake gradually givng it more gas until full throttle was reached.<br />Cruised along for about 5 minutes.<br />I then decelerated quickly to an almost stop.<br />The motor stalled and after restarting (took quite a few tries) would not take any throttle without stalling.<br />After puttering along at almost idle I gradually increased throttle until full speed was reached again. This took about 10 minutes.<br /><br />Once agin I stopped quickly and had to repeat the whole procedure.<br /><br />Has anyone experienced this situation before or have any idea where I should start for repairs.<br /><br />The carb was rebuilt 2 summers ago. All was fine when I stored it for the winter in the fall.<br /><br />Thanks for your help.
