Technical Help Please

[vmcts]

I have a 1986 Force 125 HP that had a bad compression for #2 Cylinder. The shop put a used power head in it and gave me a 90 day warranty. I took the boat out twice for about 4 hours total running time and it ran well.

I just measured the compression and I got the following:
#1 = 140
#2 = 140
#3 = 150
#4 = 130

Is this good or should I bring it back to the shop?

Thank You

 

[BuzzStPoint]

Re: Technical Help Please

With an 86, I'd keep an eye on it.. The 130 seems a little on the low side but should be fine.