Re: trim tabs
First make sure the load in the boat is the same on both sides, if not the adjust the load and try it, then make sure the tabs are set the same on both sides, if the are not make them the same and try it. If the boat leans (lists) to the left (port) side, lower the port tab a little and try it, then raise the right (Starboard) side a little, repeat until it runs level. If you lose hole shot with these adjustments then lower both tabs a little. I hope you have a slot to adjust with. Photos of the mounting and adjusting areas would help a lot here. What I just said for adjustments was on the assumption that you have a slotted adjustment.