Firemedic724
Seaman Apprentice
- Joined
- Apr 27, 2010
- Messages
- 36
Folks,
hope you can help me on this one..
Went out today and noticed at about 1000 rpm while in gear the port engine had a slight vibration but at cruising higher speeds it went away? I have a Rinker 290 Fiesta Vee with twin Mercruiser 4.3 litre engines and Alpha 1 outboards. I struck a piece of wood with my outdrives that measured about 4' by 3" in diameter. I was wondering if that may have thrown my port prop that is stainless steel out of wack? If so, is the prop repairable or am I better off replacing it. If so how do I find the right prop for my boat?
Any help would be appreciated...
What do you think?
hope you can help me on this one..
Went out today and noticed at about 1000 rpm while in gear the port engine had a slight vibration but at cruising higher speeds it went away? I have a Rinker 290 Fiesta Vee with twin Mercruiser 4.3 litre engines and Alpha 1 outboards. I struck a piece of wood with my outdrives that measured about 4' by 3" in diameter. I was wondering if that may have thrown my port prop that is stainless steel out of wack? If so, is the prop repairable or am I better off replacing it. If so how do I find the right prop for my boat?
Any help would be appreciated...
What do you think?
