Hi All,
Got a new boat a few weeks ago....thanks to all the posters for some great advice....
I took a short test run on a local lake and noted the water temp at 130. Between then and now, finally got some feedback from the original owner though the dealer that the impeller had never been changed...the guys message was that he didn't use the boat that much (170 hrs/8 years) so he didn't bother......?????.....I thought, whoa....8 years...got to get it changed now before my next trip. My local repair shop took care of it the same day and commented that it did not look that bad...I looked at it, never seeing one, thought the same thing, looked pretty good, in one piece and rubbery...went out two days later...water temp now reads about 20 degreas lower at around 110 or so..
So, even though the impeller looked good, it made a difference in the water temp gauge on the dashboard.
Now for the alternater gauge....this thing reads like its a full blast all the time, even after I have charged up the batteries...should this motor be charging like this....in the 16-18 range?
I don't know all the terms and ratings yet, however wondering about the charging. On a battery charger...the needle moves to 0 as the battery is getting charged up. Is there a reason my gauge is pegged to the max? Or it this a potential issue?
Thanks for any advice.
Regards,
Mike
Got a new boat a few weeks ago....thanks to all the posters for some great advice....
I took a short test run on a local lake and noted the water temp at 130. Between then and now, finally got some feedback from the original owner though the dealer that the impeller had never been changed...the guys message was that he didn't use the boat that much (170 hrs/8 years) so he didn't bother......?????.....I thought, whoa....8 years...got to get it changed now before my next trip. My local repair shop took care of it the same day and commented that it did not look that bad...I looked at it, never seeing one, thought the same thing, looked pretty good, in one piece and rubbery...went out two days later...water temp now reads about 20 degreas lower at around 110 or so..
So, even though the impeller looked good, it made a difference in the water temp gauge on the dashboard.
Now for the alternater gauge....this thing reads like its a full blast all the time, even after I have charged up the batteries...should this motor be charging like this....in the 16-18 range?
I don't know all the terms and ratings yet, however wondering about the charging. On a battery charger...the needle moves to 0 as the battery is getting charged up. Is there a reason my gauge is pegged to the max? Or it this a potential issue?
Thanks for any advice.
Regards,
Mike