I understand the port is located on the top of the engine and it takes a 14 MM Hex wrench to take it off. It's right under the Fly Wheel. Do u have to take the Fly Wheel off to remove the Hex screw? Any help with this is appreciated.
cant remember off the top of my head but I dont think its on top, its in the 04 rigging guide though. most of the 4 strokes tap into the block.<br /> i dont have the rigging guide here but its in it
cant remember off the top of my head but I dont think its on top, its in the 04 rigging guide though. most of the 4 strokes tap into the block.<br /> i dont have the rigging guide here but its in it
