Water pump indicator (?)

[brad614]

When I was raising my engines tonight one of them caught the dock line in my slip. It broke off the little sprayer that snaps into the flush port that shows you that the water pump is working. What is it called, and where can I find one?? Google was no help...

 

[mark1961]

Re: Water pump indicator (?)

I think "telltale" is word youre after......what year are your motors?

 

[brad614]

Re: Water pump indicator (?)

2000 Evinrude 225 FICHT

 

[Auxlarry]

Re: Water pump indicator (?)

Brad614

Try this site and locate the parts from the factory.

http://epc.brp.com/Index.aspx?lang=E&s1=d87834ff-b196-4c2b-b2b7-91993efa4bf4

Go to the little box next to the word Product (select one), click the down arrow and pick Evinrude, then pick the year, then the hp. It will give you lists of all the parts and part numbers.

Larry

 

[rpastor]

Re: Water pump indicator (?)

Did you break the nipple or the tubing? A temporary fix is a grommet and new tubing.

 

[daselbee]

Re: Water pump indicator (?)

Did you break the nipple or the tubing? A temporary fix is a grommet and new tubing.

Different design...there is no nipple or tubing on this model. Shoots out a fitting in the exhaust adapter. Parts are only available from an Evinrude dealer.

However, I cannot for the life of me figure out how you could break that...unless you had some kind of aftermarket piece fitted into the flush port. Factory setup...should not break.

 

[brad614]

Re: Water pump indicator (?)

Mine have quick releases so you can also put the flush hoses in there. One of my stern tie lines caught it. Found an Evinrude dealer that had them for $10 a piece so I am good now. Thanks everyone!