Weird hardware part... where do I get one of these? (bimini part)

BHA

Cadet
Joined
Sep 11, 2007
Messages
11
Hello,

I was trailering my boat and the white nylon piece in the attached picture loosened and fell off.

Now I can put my bimini up, but can only secure it on one side as the other part is missing.

Where do I get this part? I have looked at a bunch of parts catalogs, West Marine online search, etc. Can't find it anywhere.

This is the closest thing I can find:
http://www.duckworksbbs.com/hardware...e-sp/index.htm
(see 2nd pic on the page)

It doesn't look like the open jaw is wide enough to go on my windshield (the silver part in my pic). Also not sure about the hole location.. even if I drill a new hole I'm not sure the piece is "deep" enough to accept my windshield.

This is on a 2005 Maxum 1950SR3. It doesn't look like a Maxum-specific part or anything custom made.. I'm sure somebody made this for them and I can't seem to figure out who :)
 
Last edited:

Grub54891

Admiral
Joined
Jun 17, 2012
Messages
6,158
If your windshield is 5/8" the first one will work. You may have to drill a new hole for the pin,but be careful not to hit the glass with the drill.
 
Top