what is the part number and/or source for the tiny hoses coming off primer solenoid

[cfauvel]

motor is 1986 evinrude 225....the tiny ID hoses that go from the primer solenoid to intake manifold...I cant find a part number or size of the hoses..

they are the same hoses (I think) from the recirc valves to each cylinder.

 

[ob]

Try marine engine dot com. They have parts diagrams for your engine.

 

[daselbee]

Chris....I usually replace those lines with Tygon fuel line and I get it at any small engine shop. That is the yellow semi-transparent line used in many chain saws, etc.

 

[cfauvel]

Try marine engine dot com. They have parts diagrams for your engine.

Yeah I tried several sites and part #57 never seems to be listed
wwwDOTmarineengineDOTcom/parts/johnson-evinrude-parts.php?year=1986&hp=225&model=E225TXCDA&manufacturer=Evinrude&section=Intake+Manifold

 

[cfauvel]

Chris....I usually replace those lines with Tygon fuel line and I get it at any small engine shop. That is the yellow semi-transparent line used in many chain saws, etc.

Sweet I 'll try that....and it will jazz up the engine a bit too.

 

[daselbee]

Part number 0326449 Primer hose has been superceded to a new number....0772568 if you want the 'Rude part.....

EDIT: It is 1/16" I.D. too if that helps.

 

[daselbee]

For those of you who are having trouble finding parts, be aware that BRP does NOT maintain the drawings from the aspect of updating the part numbers if they change.
You can look up the hose part number and find 0326449, but it says obsolete.
If you are a dealer, you have access to the supersession chain.

If you are like the rest of us, then there is always Crowley Marine. When you look up a part number on their site, the supersession chain is listed at the bottom of the page. It is very helpful.

www DOT crowleymarine DOT com

 

[cfauvel]

Part number 0326449 Primer hose has been superceded to a new number....0772568 if you want the 'Rude part.....

EDIT: It is 1/16" I.D. too if that helps.

thank you!!!


exactly what i was looking for

 

[cfauvel]

Part number 0326449 Primer hose has been superceded to a new number....0772568 if you want the 'Rude part.....

EDIT: It is 1/16" I.D. too if that helps.

DaselBee...found out that the 1/16 ID is too small....they are actual 1/8" ID....but ended up using 3/32" ID for the time being...will order the correct 1/8" clear tubes in a bit....

 

[daselbee]

This is what I went by:

http://www.crowleymarine.com/johnson-evinrude/parts/61037.cfm?q=0772568