Where can I find a trolling motor for an I/O?

[jestncase]

Do they make attachments and or trolling motors for boats with I/O motors, such as my Cobalt 220 bowrider? From the limited online shopping I've done so far, it seems as though I'd be hard pressed to find a decent trolling motor that could attach to the bow of a boat that is not a fishing boat.

Anyone know where I should be looking to find such a trolling motor?

Thanks.

 

[Barnacle_Bill]

Re: Where can I find a trolling motor for an I/O?

They make special mounts for casesw like yours. They also make trolling motors that attach to the outdrive.

 

[The Troll]

Re: Where can I find a trolling motor for an I/O?

Don't know the configuration of the front of a Cobalt 220. Hand rails ect. They make a trolling motor that attaches to the cavitation plate of your lower unit. Minn Kota's E.M (engine mount) comes 12,24,or 36 volt,with these units you have to steer the boat with your steering wheel. As far as a front mount unit the longest shaft you can acquire form Minn Kota is 60"(inches). I would recommend looking at Minn Kota's web site. Look at the Powerdrive units as you can set these up with a quick dis-connect bracket that will let you remove it if your not going to fish. Good luck!

 

[Toxarch]

Re: Where can I find a trolling motor for an I/O?

Motor Guide makes a wireless trolling motor with a small mounting plate. Might work for a bow rider. They offer it with a 60" shaft and 75 pounds of thrust.