Where can I get a block-off for a v150 other than rickracers.com??

[cbucner]

Hello!
I'm looking for an oil block off kit vor a mercury v150 and I can't find one other than rickracers.com.
I don't like their payment options and I want something that I can pay it right away and have it here fast.
Anyone that ordered this kit with the extension shaft to hold the bushing from any other site ????
A mercury part nr maybe ???
Any help appreciated.

 

[cbucner]

Re: Where can I get a block-off for a v150 other than rickracers.com??

Nobody???

 

[j_martin]

Re: Where can I get a block-off for a v150 other than rickracers.com??

Hello!
I'm looking for an oil block off kit vor a mercury v150 and I can't find one other than rickracers.com.
I don't like their payment options and I want something that I can pay it right away and have it here fast.
Anyone that ordered this kit with the extension shaft to hold the bushing from any other site ????
A mercury part nr maybe ???
Any help appreciated.

You need part number 43453 (Merkury) if it is available. That retains the pump driveshaft bushing and plugs the hole where the pump mounts. Then remove the oil components and the warning module. You'll also need to remove the fitting that the oil tank pressure hose attaches to and plug the hole in the block.

Order three stickers (37-818029 1), one to mount near the fuel fitting on the motor, one for the dash, and one near the fuel fill fitting on the boat. They'll alert the operator that the gas needs to have oil added. One frequent problem we see here regards the infamous "brother-in-law" that forgets to add oil to the gas and roaches the motor.

You should probably replace the fuel lines where the fitting for the oil T's into the fuel line with a single piece of fuel line.

There's been some trouble with rickracer.com I wouldn't do business there.

hope it helps
John

 

[cbucner]

Re: Where can I get a block-off for a v150 other than rickracers.com??

Is this bushing pressed in or it can be pulled out with some sort of tool or something???What is it made out of ?? bronze ??
Thanks
I checked the part you said but I still can't find a picture of that part yet to makes sure is what I need.It just sais it's a plug.
I will end up maybe pulling the original part out and machine one out of billet aluminum myself.

 

[j_martin]

Re: Where can I get a block-off for a v150 other than rickracers.com??

That part number is the Mercury block off plug, which has the post to hold the bushing in the motor.

I think it is difficult to remove without dropping it into the engine, which would be a rather counterproductive development. The hole needs to be blocked off anyway. With the right part, all your bases are covered. It's $5.89 at mercruiserparts.com. Probably available at iboats, and for sure mercury parts.

Jay smith racing maybe makes a chrome plated one if you want to get fancy.

hope it helps
John

 

[j_martin]

Re: Where can I get a block-off for a v150 other than rickracers.com??

Here's a link to the part number with a detailed description, and a picture.

0 ring needed is 32509

http://outboardparts.com/mercury/products/43453.htm

hope it helps
John

 

[cbucner]

Re: Where can I get a block-off for a v150 other than rickracers.com??

Thanks Martin, I ordered the part from outboard.com
Well appreciated.