Re: Winterizing Checklist
Does anyone here use a Winterizing Checklist?
yep..... the list works great...
Add Sta-Bil & top off fuel tanks, run to at least normal operationl temp.
Fog thru carb. With fogging oil
Wash Hull
Ucky ducky hull
Wax hull
Silicon Eng. Block
R&R hypoid oil
Drain block
Drain exhaust manifold
Drain exhaust riser
Lube steering shaft
Lube grease zerts
Armor all vinyl
Remove bat.
R&R engine oil
Clean FA
Remove drain plug
Tape gas vent holes shut
Remove prop, lub prop shaft, waterproof grease & tape over exhaust
Plastic bag over carb.
Remove t-stat & fill block & manifold with anti-freeze
Remove sparkplugs and squirt in 1 oz. oil, rotate w/o plugs for 15 sec.
Remove valve cover and inspect for moisture
Lub ride-guide steering cable end
Lub pivot socket of steering pin
Lub u-jointshaft splines & engine coupling splines
Lub drive unit upper & lower pivot pins
Lub drive unit hinge pins
Lub u-joint
Lub prop shaft
Check bellows condition
Check water pump impeller
Check drive paint surface spray w/ corossion inhibitor
Check engine alignment
Notes
@ 24 hrs, yer pretty fast though... i usually drag it out for a few weeks. especially the waxing of the hull part...