hey guys ,, any help will be greatly appreciated. I have a 115eltg yamaha , think it is a 1988 model . It had been sitting a couple of years when I got it , carbs had just been rebuilt and then the guy got a saltwater rig and let this boat set . We had some dry lakes around here . I pulled carbs and cleaned them . Siphoned as much gas as I could out of the boat . Replace gas about six gallons and used a can of sea foam , (btw oil injection is still on motor).
Finally got a chance to take it out to the lake , it bogged real bad on take off . Not sure if it matters but its on a Stratos 264 Bass Boat , should be plenty of motor for this boat . Any was like I was saying it bogs , I can hit the choke button as I plane out and it will plane an run fine at higher speed. I am sure I have a blockage in a jet somewhere, or could the air adjustment screws cause this , not sure if they are set right in the first place , any help . Sorry for the long post , Thanks Mike
Finally got a chance to take it out to the lake , it bogged real bad on take off . Not sure if it matters but its on a Stratos 264 Bass Boat , should be plenty of motor for this boat . Any was like I was saying it bogs , I can hit the choke button as I plane out and it will plane an run fine at higher speed. I am sure I have a blockage in a jet somewhere, or could the air adjustment screws cause this , not sure if they are set right in the first place , any help . Sorry for the long post , Thanks Mike