Yami Command-Link and NEMA2000

[imported_sblair99]

I couldn't find much on Command-link in the search, so hopfully this isn't retreaded ground.

I have a '05 150 HPDI (Z150TXRD) and I have my boat rigged with a NEMA200 network. The problem is that I can only find limited references to Command-Link.

My questions are:

1) Is Command-Link able to be integrated with NEMA2000?
2) Does my OB have Command-Link support?
3) If so, where can I find documentation and connectors for rigging?
4) Does anyone have a good site for reference?


Thanks

Steve

 

[rodbolt]

Re: Yami Command-Link and NEMA2000

yes command link can be intergrated with nmea 2000, no the 05 D model HPDI does not support command link.
best place to find information is in the 06 marine technical guide.

 

[imported_sblair99]

Re: Yami Command-Link and NEMA2000

Thanks Rodbolt, for this response and all the wealth of information you share on this site.

Steve