Latest activity

What's new New posts Latest activity

W

Willyclay reacted to Woodonglass's post in the thread 1961 Lonestar Flamingo - SPLASHED w/Pics with Like.

I’m still here!!!!

Saturday at 10:38 AM
HillbillyGuy reacted to airshot's post in the thread Temp sender removal … with Like.

Brass and aluminum do not play well together unless a barrier was added to the threads before install. Worse case scenario is the head...

Saturday at 10:34 AM
A

airshot replied to the thread 25hp Yamaha Bogging Down.

You swapped the wires between the two cylinders and the motor ran ok in both positions?

Saturday at 10:26 AM
dingbat replied to the thread New to hydraulic steering.

First off, have you followed the bleeding process to the T? Taking short cuts rarely pays off Leaks on the suction side rarely leak...

Saturday at 10:23 AM
A

airshot replied to the thread Temp sender removal ….

Brass and aluminum do not play well together unless a barrier was added to the threads before install. Worse case scenario is the head...

Saturday at 10:21 AM
A

airshot replied to the thread Newbie boat owner.

If you plan on keeping this boat, I would beg, borrow, hunt, search, scour until you find a factory service manual for it. I have found...

Saturday at 10:13 AM
dingbat reacted to Grub54891's post in the thread transducer with Like.

Geesh. I do need new glasses!

Saturday at 10:10 AM
D

Dboatguy replied to the thread Volvo Penta 3.0 GLP-D (PCV valve popping off while running - carbon buildup on boat thru exhaust).

Wrong it’s on the valve cover going to the carburetor, below the third throttle plate

Saturday at 10:10 AM
dingbat replied to the thread Gauges recommendation.

Did you ever resolve your over voltage issue? All kinds of weird stuff can happen if you’re operating in real over voltage situation.

Saturday at 10:09 AM
A

airshot replied to the thread Gauges recommendation.

In my years of boat ownership, most issues with gages have been corroded, dirty, loose connections !! Could count on one hand the...

Saturday at 10:07 AM
ESGWheel replied to the thread Thermostat too dirty.

Danger Will Robinson! We need someone with experience on this system to help the OP further, like @Fun Times But in the meantime, what...

Saturday at 10:06 AM
A

airshot reacted to nola mike's post in the thread Gauges recommendation with Like.

Yes. Much more likely that you have bad electrical connections at the helm or elsewhere.

Saturday at 10:00 AM
A

airshot reacted to nola mike's post in the thread Gauges recommendation with Like.

Are you sure the gauges are bad?

Saturday at 10:00 AM
A

airshot replied to the thread 1957 Johnson Seahorse 35hp value?.

Fewer folks are capable of repairing nowadays, we have become or are turning into a throw away society. With high labor costs and...

Saturday at 9:59 AM
HillbillyGuy replied to the thread Temp sender removal ….

Its the temperature sensor/sender that sends signal to temp gauge. I tested the wiring a gauge and they are good. Either the sender went...
Saturday at 9:49 AM

Show older items

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Latest activity

Follow Us