40 yahama getting water on spark plugs

[tr-21]

changed head gasket on motor but its still getting water on plugs any ideas thanks

 

[99yam40]

look at the exhaust plate divider plates and gaskets

 

[robert graham]

Did you check/resurface the head for being warped when you removed it for gasket replacement?....

 

[Captain Marooner]

Is it getting water on all 3 cylinders ?

 

[tr-21]

Did you check/resurface the head for being warped when you removed it for gasket replacement?....

Just buffed it good didn't do no machine work on it

 

[tr-21]

Is it getting water on all 3 cylinders ?

Yes all 3

 

[tr-21]

look at the exhaust plate divider plates and gaskets

OK thanks

 

[robert graham]

If it's warped then you can lay a sheet on Emory paper on a good solid flat surface and using a figure 8 pattern using your hands to sorta grind it back flat....if that's the problem. Of course you might have a pin hole in the cast aluminum somewhere that's causing the leak....