Search results

  1. kbait

    2005 Johnson 4 stroke 15 HP motor needs a propeller

    Right here on iboats: https://boatpropellers.iboats.com/Johnson/15_HP_(2002-2007)_Propellers/899/?cart_id=590769859
  2. kbait

    1927 johnson k 35 ignition.

    With coils under flywheel, flywheel needs to be in correct orientation (keyed) for spark to be generated when spinning. You could torque flywheel down without key, in correct position to test if you don’t have a key..
  3. kbait

    1963 Evinrude Mate 2 hp impeller

    Impeller 382221 Check Amazon, Found them pretty cheap aftermarket. I searched this site Iboats.com, but I couldn’t find one. I like to buy from here if possible since they host this forum.. Good luck with your project.
  4. kbait

    Broken low speed needle

    Thanks for the update! Nice to hear about successful outcomes..
  5. kbait

    3.5 hp fuel tank cap

    https://forums.iboats.com/threads/salvage-yards-by-wilde1-verified.428012/
  6. kbait

    Lower unit reassembly

    Gearcase group https://www.marineengine.com/parts/evinrude-johnson-parts-diagrams/EVINRUDE/278540-GEARCASE-GROUP.gif
  7. kbait

    Lower unit reassembly

    Here’s lower unit group https://www.marineengine.com/parts/evinrude-johnson-parts-diagrams/EVINRUDE/278540-LOWER-UNIT-GROUP.gif
  8. kbait

    Best fuel stabilizer for older 2 strokes

    Alcohol absorbs water. E10 in tank/carb will absorb water over time, and phase separate.., then you are trying to burn water in combustion chamber.. If you figure out how to burn water.. let me know, and we’ll be extremely wealthy.😎
  9. kbait

    Oh no! Broken controls.

    Good news!
  10. kbait

    Hub repair

    I have seen this repair using set screws instead of bolts after drilling/tapping holes. You would lose gear protection on rock strikes.. or shop right here: https://boatpropellers.iboats.com/Johnson-Outboard-Propellers/?chart=8&engine_id=30&cart_id=082274992 or a find a used prop. Good luck!
  11. kbait

    Best fuel stabilizer for older 2 strokes

    I’ve been using Star Tron Enzyme Fuel Treatment for a few years on all equipment for winter storage. Also using non-ethanol fuel so double-good.. supposed to work fine with e10 too.
  12. kbait

    Gear Lube for 1969 18hp Evinrude

    You want lower unit gear lube.. has additives to keep water in suspension..
  13. kbait

    1964 9.5 HP Evinrude

    Tank vented?
  14. kbait

    Opinions on aftermarket johnson/evinrude parts

    Steer clear of cheap fuel pumps and carb kits! OEM or Sierra are good
  15. kbait

    Fuel line for pressure tank

    OMC: 772566 Sierra: 18-8051
  16. kbait

    Slipping

    Prop hub bushing is slipping.. do a quick google search on confirming this, then get a new prop, used prop, or have yours ‘re-hubbed’ at prop shop.
  17. kbait

    1986 90hp johnson primer bulb collapsing..hear me out

    My ‘84 90hp VRO was converted to premix by prior owner. He said a ‘83 90hp type fuel pump was used (‘84 was first VRO year)..
  18. kbait

    1979 Johnson 6hp spark on 1 cylinder

    Upper coil obviously not firing even with proper input from CDI. Replace coil. Aftermarket may have been a coil for a points motor, and is not compatible, even if it “ohms out” as good.
  19. kbait

    1975 evinrude 6hp gas line replacement

    5/32” ID fuel line from pump - carb. 5/16 connector - pump
  20. kbait

    No water from Tell Tail.

    Pull telltale hose off block, probe port w/wire and re-try. oh.. if you’re testing on muffs, try it in barrel deep enough to submerge impeller or lake test. Muffs can show strange issues, and are not a valid waterpump/cooling system test anyway.. good luck!
Top