Search results

  1. R

    Help me set up my new edelbrock 1409

    Ok it seems to be that way right now
  2. R

    Help me set up my new edelbrock 1409

    ok so I have the new 1409 carb bolted on. The way the avs2 carb was set up in neutral, the throttle cable doesn't match up so I adjusted the cable end to match the new carb. Is this the proper procedure? Just asking before I fire her up on the fake a lake
  3. R

    how to set up 1998 Ski Ray tournament inboard for wakeboarding

    It's a direct drive inboard tournament boat and rare at that. It was very faint when I was under there yesterday but doing research a 13"x13" pitch is pretty popular for skiing and wakeboarding. I'll take a better look but here's a pic of the boat for reference
  4. R

    how to set up 1998 Ski Ray tournament inboard for wakeboarding

    so looks like I have a 13x13 prop? Does that make sense? Also this boat doesn't have an accessible ski locker. i've heard liek 2 750 lb bags in the rear and wake shaper and I'll have a surfable wave. Doing a carb swap now and then I'll be getting to the fun stuff soon hopefully
  5. R

    Help me set up my new edelbrock 1409

    Yes that will be the test when I get her in the water under load and no I don't want to go to wot in reverse unless I want a submarine. Without the wedge I'm more concerned with how it will perform out of the hole with a wakeboarder or skier on the back
  6. R

    Help me set up my new edelbrock 1409

    this was my answer back yesterday but it didn't go through for some reason, "Ok I took a look it's a spread bore intake and that small spacer is the adapter to square bore. " So I think i'll try it with my the conversion spacer and see how she runs. The wedge is a discontinued item but I may...
  7. R

    Help me set up my new edelbrock 1409

    It's a 2 plane intake. 2 large holes on either side
  8. R

    pulsating sound in stereo system

    Ok sounds i tested all interior speakers and tower speakers. They all work off the deck. So the amp was cooked. The jackass wired all 4 of the tower speakers through one wire and into the amp and then jammed the rest of the speakers into 2 channels. Meaning 10 speakers into 2.l channels while...
  9. R

    Help me set up my new edelbrock 1409

    So even the small aluminum one that directs flow forward is worse than having no wedge and just a straight carb on there? Definitely know the guy is a hack. You should or shouldn't see the stereo wiring I'm sorting out as well
  10. R

    Help me set up my new edelbrock 1409

    Ok check these pics out. These aren't open spacers. They're both aluminum. Both have 4 holes not just an open plenum and it looks like the small spacer actually directs fuel to the two front barrels. Maybe I can just use the small aluminum one instead of worrying about the wedge as it directs...
  11. R

    Help me set up my new edelbrock 1409

    I saw the wedges on there. I've read online that a 12 degree wedge is the way to go. They are crazy expensive. Like $300usd or $15cad for a piece of aluminum. I found a 5 degree one locally for $100 but not sure that would do the trick. I'd like to know what degree the stock one (Mercury...
  12. R

    Help me set up my new edelbrock 1409

    The monstrous exhaust thingy is a muffler dual into single exhaust out the back. Not sure why they designed it for a single exhaust. As far as the spacers being taken off I'll have to find the stock size carb mounting studs. Also I am a little concerned about not having the stock wedge spacer...
  13. R

    Help me set up my new edelbrock 1409

    sounds good. Hopefully I don't need to re jet as everyone so far has said it's as close to a bolt on as you can get. I may get to it after work tonight depending on the weather
  14. R

    Help me set up my new edelbrock 1409

    Thanks for the info so far, it has a mechanical fuel pump with the yellow fuel line that should be connected to the carb nipple. The PO just had the open yellow line laying on the intake which is insane.
  15. R

    Help me set up my new edelbrock 1409

    The motor is a mercruiser 350 ski mag, with a replaced block
  16. R

    Help me set up my new edelbrock 1409

    Hi there, I recently bought a Sea Ray Ski Ray tournament inboard ski boat that came with an automotive carb that was too big (800cfm). I bought a brand new edelbrock 1409 carb for it. I want this thing purring and trouble free for the summer. I plan to ski, wakeboard and surf my boys this...
  17. R

    pulsating sound in stereo system

    yeah, looks like it was wired by the Prince of Darkness. I am going to hook up each speaker to the deck individually, towers included to see what comes out and report back. May be a few days before I get back to it as I'm putting a new carb on the motor
  18. R

    pulsating sound in stereo system

    I'm 48 I feel you on that. I bought the boat this way, I don't crank the music but I like things to work properly. It's pissing me off looking at it. It's more for when I take my boys out for a cruise on our lake or watersports with their buddies.
  19. R

    pulsating sound in stereo system

    Once I removed the remote from the first amp that powers the tower speakers the noise went away. The subs and second amp are working fine. Bizarrely only one speaker off the deck is currently working....
  20. R

    pulsating sound in stereo system

    I bought a new boat to me with 4 tower speakers, 4 interior speakers and 2 12" subs. From what I can see under the dash, the deck is running the interior speakers, 1 amp is running the tower speakers and the other amp is running the subs. Subs seem to work, the tower speakers kind of work...
Top