Search results

  1. brian3127

    Mercruiser 3.0 ignition module

    Serial number is in my signature section. Fresh rebuild I want to get this correct. Got it running out of the boat on a skid. I’m trying to set the timing. And it will not go into base timing. I followed the directions first pic. The motor block is 1978. It has been upgrade to ac Delco est...
  2. brian3127

    want to run my engine out of the boat.

    serial number 4920382 back story on the engine it started knocking last year. so we pulled it. Piston 3 was broke. we sent the block and the head out to a machine shop and they did their thing. Me and son just finished up rebuilding the engine and we want to start it and run it before we put it...
  3. brian3127

    Thermostat

    Finishing up putting the engine back together. Serial number 4920382 What temp thermostat is recommended
  4. brian3127

    what size kicker should I get.

    I have an 19ft aluminum with a small cuddy what size 4 stroke kicker should I get for trolling. this is the boat. the tower was taken off so its just the boat.
  5. brian3127

    Mercruiser 3.0 carb issues

    Carb is off a 1978 engine. 1985 boat so I don’t know what year the carb is. Engine Serial number 4920382 First video Is there supposed to be this much slop between the linkages Second video. turn the volume up to hear the clicking coming from the butterfly valves at the bottom of the carb...
  6. brian3127

    Mercruiser 3.0 top end gasket set

    Serial number of the engine 4920382 Will a mahle hs5719 work for my engine. If not what kit would be best. Thanks
  7. brian3127

    Mercruiser 3.0 head gasket

    Serial number of engine 4920382 The engine block was taken to a machine shop and bored .030 over. Do I need a special gasket for that? And if I do can you give me the part number. Thanks
  8. brian3127

    oil pan gasket

    I have roughly a 1978 Mercruiser 3.0 serial number 4920382. I have seen videos on the same engine getting rebuilt and he had the blue one piece gasket. im sure the engine he was working on was newer. Do they make a one piece gasket for my engine.. We had our engine machined at a machine shop (...
  9. brian3127

    Setting the timing

    I have a 1972-1977 mercruiser 3.0. Serial number 4920382 I have seen on YouTube that you have to put the engine in base mode to set the timing. My mercruiser service manual tells me to run the engine at idle and set it to 6 degrees btdc. What years did they change it
  10. brian3127

    what manual to buy.

    I am getting my Mercruiser 3.0 back from the machine shop today. Gettinga full rebuild. what is the best manual to buy for putting it back together.
  11. brian3127

    Aluminum and fiber glass

    I have a smoker craft 19ft aluminum hull. wood floor. I took the carpet out and was going to paint the floor. The wood is not rotted but it’s not smooth. Could I go over the wood with fiber glass to smooth it out. Would the resin or fiber glass react with the aluminum. Thanks
  12. brian3127

    getting rig of the carpet.

    I have a 1985 smoker craft. the wood floor is still in good shape. the carpet is not. looking for suggestions on what to replace it with. we mainly salmon fish in lake Mi. so i would like to stay away from the carpet.
  13. brian3127

    1985 mercurial 3.0 130hp piston

    Engine was knocking last time out. So me and my son pulled the engine out of the boat. Started to tear it down to day. We have owned this boat for 2 years This is piston #3 Question. what would cause this? Engine had plenty of oil. Oil pressure on the gauge was above 40lbs. water temp was...
  14. brian3127

    mercruiser base timing

    I have a 1989 smokercraft with a mercruiser 3.0 engine. I had to buy a plug that goes into the ignition module so I can put the engine on base mode. When I start the engine and then plug it in and connect to 12v the engine rpm does not drop at all so what does this mean. I thought I read...
  15. brian3127

    set timing

    I have a 1989 19ft smoker craft with a mercruiser 3.0. I have watched videos on how to set the timing on the engine. But they don't say what year there motor is. When I look at the distributer cap there isn't a second plug in it with the 2 white and black wires. There is just one plug on the...
  16. brian3127

    Setting idle rpms

    Do you set the idle in neutral or in gear. and is recommend rpm at idle 700
  17. brian3127

    fuel pump

    I just bought a 1989 19 ft Smokercraft with the Mercruiser 3.0 engine. it was running rough so i pulled the carb off the engine and found dirt and water in the bowl. so yesterday i pulled the tank out of the boat and cleaned that. now my question is. Should i get rid of the mechanical fuel...
  18. brian3127

    hydraulic tilt pump

    I have a 1993 mercury40 hp oil injected outboard motor I am trying to remove my hydraulic tilt or trim (whatever its called) to get it rebuilt. I have removed all the bolts that hold pump and hydraulic arm to the boat but I cant figure out how to slide the 1/2 dowel to disconnect the arm from...
  19. brian3127

    Primer bulb on a 1993 merc 40 hp

    The primer bulb was replaced by the shop I bought the boat from. Warranty work. Because the old one broke apart and clogged the carbs. So they cleaned the carbs and replaced the primer. That took 2 weeks to fix but anyway that's.long story. Well I get it back today and bring it to the water to...
  20. brian3127

    New head and gasket and impeller installed video

    Seems to be running good now Sorry for the side ways video
Top