Search results

  1. R

    1980 35hp checking water supply

    New to evinrude and trying to bring this one back to life. I replaced the water pump the other day and I have just gotten it running for this first few times this week. The telltail seems to be slow to start running and tends to just dribble. It will spray at a 1/2 throttle or more, but not...
  2. R

    spark issue maybe?

    Re: spark issue maybe? I did the two throttle adjustments(cam and control rod) no change in starting. So while fiddling, I discovered this, the idle adjustment screw on the throttle is bent pretty bad anyone no where to find a new one? Is this my problem or just another thing along the path.
  3. R

    spark issue maybe?

    '80 evinrude E35elcsm I rebuilt the carb. cranked it over and it ran for total of 3 sec. and died. now all I get is an occasional light single backfire and a little smoke from the exhaust. checked the fuel pump and it seems fine, I can smell fuel from the carb area. I'm thinking this might...
  4. R

    First evinrude carb rebuild, and kit is missing a part

    1980 35hp carb rebuild, was going smoothly until I came to reassembly. The carb was frighteningly dirty, and I thought nothing of the plastic needle valve retainer, crumbling during breakdown. Come to find there is no needle valve retainer in the kit. There were four choices with and without a...
  5. R

    evinrude ignition wiring?

    Ive got an '80 E35ELCSM model. I purchased a sierra switch for it and wired it according to the service manual and it's obviously incorrect somehow because when in the on position the starter runs and doesn't stop until switched off. here's my wiring: red/purple-B...
  6. R

    spark plug recomendations?

    '75 merc 1150 inline 6 needs to be changed and I am looking for opinions. Should I stick with surface gap or switch to the conventional type which Ive read are hotter burning? any help is appreciated
  7. R

    Ignition switch?

    Hi all I purchased a '80 evinrude 35HP model E35ELCSM with electric start and I need an ignition switch for it. I'm hoping someone here can tell me where I can find one or possibly which model. I have been doing some reading from service manuals and it looks like I need one with an electric...
  8. R

    What's the inside of a stumpnocker 2 look like?

    I am repairing a 1978 stumpnocker 2. It has a break in the keel that had been patched/repaired and then rebroken and very poorly patched again. There is very little that is internal on these. The hull and the inner floor are very close and in the bilge it is the same fiberglass. It looks like it...
  9. R

    oil on plugs?

    I went to look at my spark plugs on my '74 mercury 115 inline 6 and noticed the lower 2 plugs have unburned oil on them is this normal or something I should be worried about? she still runs great in spite of this issue.
  10. R

    Lower unit leaking...can't get prop off!

    Re: Lower unit leaking...can't get prop off! I went through this when my older mercury 115 spun its prob. I ended up renting and modifying this puller from advance auto it worked great. Had to wrap all the prop blades with a ratchet tie down strap to pull the prop and then as you can see in...
  11. R

    Manual suggestions

    I am a new owner of a 1980 35hp E35ELCSM Evinrude. I would like to get a good detailed repair manual for it. I am fixing up an old Stumpnocker 2 flats boat for it to push around. My outboard experience is with a different brand, so I have to get up to speed on this one. Money doesn't grow on...
  12. R

    New to trolling motors

    I was given an old 35lb 12v great white Motor Guide brand trolling motor to put on my john boat but FL requires a boat be titled if any form of motor is installed. I am starting from scratch repairing and setting up a 14' stumpnocker 2, that will replace the john boat for fishing the salt...
  13. R

    leaf springs?

    Hey all I'm posting here for opinions on my boats/trailer's weight. I need to replace the leaf springs but I'm not sure of what size spring I need to get because I have no clue of the boats weight. the hin tag was taken off by a previous owner and the title says nothing about the weight. so here...
  14. R

    New prop, do i have everything

    I stumbled on a boating place going out of business.They had a few Turning Point ss props that were in my price range. My 1975 mercury 1150 had a 13 1/4 x 19 very beat up aluminum, that recently spun it's hub. It's on a 15' tri hull and I've been off the water since then. They had minimal staff...
  15. R

    spun prop?

    So it happens that I have one. So am I now looking at buying a new prop or can I get away with just installing a new hub? And if hub is doable is this the hub kit needed for a '75 merc 1150? hopefully the link works. Thanks for all the help.:)...
  16. R

    merc. 1150 ?

    hey all, I rebuilt the carbs got them adjusted and took the boat out 2 weeks ago and the motor ran great out on a river. decided to take the boat out to the gulf and it wouldn't get up above 20k RPM's. I'm stumped as to the problem. Any insight for the direction I should look would be...
  17. R

    After the carb rebuilds, still have fuel problems

    It's a 1975 1150 straight 6, had it running many times, leaks gas every time. The throttle is now adjusted right, and it engages forward and rev. Runs good other then gas leaking out the bowl, somewhere along the bottom and spurting at me out the float chamber overflow port all from carb 3. It...
  18. R

    Help evaluating the hull

    First boat and things up top are going good. Well time for the hull, it has a number of issues and I would like to hear some thoughts. I have only done fiberglass on cars. Not when it has to hold water or else. The front damage is down to the woven cloth in a few places. Just down from that is...
  19. R

    First time throttling up and got oil.

    This is on a 1975, 1150 straight 6. The last owners replaced the throttle after breaking it (they say when they hit a sand bar). It did not work right for them and they thankfully lost interest . I am glad they did not do a lot with the boat. Their rewiring job took sometime to fix. Anyway we...
  20. R

    steering dent, 115 mercury

    Steering was not moving. I've got it apart somewhat. Cable responds from wheel so that looks OK. Last owner was less then helpful. The dent is old but I have no idea how much it effects the steering. I can't seem to get it any more apart. A diagram of what is inside would be great. If I can...
Top