Search results

  1. R

    Jonsson 235v6 78vm

    Looks like the motor was assembled and never started up ???
  2. R

    Counter rotation conversion kits

    No such thing was ever offered.
  3. R

    1981 Mercury 7.5 2 stroke

    Issues with these 7.5 / 9.8 HP motors---Poor impeller design.-----They do not have an overheat warning system.-----They do not have overheat shut down.----Engine must be taken apart to replace the lower crankshaft seal.---------Replace crankshaft seals when you have it apart.--Replace upper and...
  4. R

    1981 Mercury 7.5 2 stroke

    I see evidence on scoring in cylinders.----No magic potion can fix that.----Yes the motor can run the way it is.----There is a difference between " running " and running as designed.
  5. R

    Transom replacement or design flaw?

    They forgot ( saved money ) by not putting a brace ( knee ) between transom and bottom of the hull.-----Easy fix for me here.
  6. R

    1993 fast strike 150 carb jets

    The pulse limiter is a " FLOWFUSE " for the VRO pump housings.-----Not needed for other style pumps.----I see a 57D or 59D for the 150 model.
  7. R

    1981 Mercury 7.5 2 stroke

    I see the scoring.----Motor must come apart to be refurbished.----Inspect all parts and decide on a path forward.----Note----I own more than one of this motor type.-----Last one i got for free.----Most shops do not want to work on them anymore.
  8. R

    2000 30hp Johnson possible water restriction/over heats

    The oil mixing unit was under the oil tank.----Separate from pumps.----I have more than a few of these motors for parts.----Bought 3 one time and each one had oil tank and mixing unit removed.
  9. R

    1981 Mercury 7.5 2 stroke

    I doubt you will ever find one at 165 PSI.-----Remove bypass cover and have a look at pistons / rings.----Just 3 screws and make a new gasket.
  10. R

    2000 30hp Johnson possible water restriction/over heats

    Those 25 / 35 HP all had 2 fuel pumps installed at the factory.
  11. R

    1st time buying old boat

    See more trouble today caused by mis-adjustment of mechanical shift rod and slow shifting by newbies.
  12. R

    1981 Mercury 7.5 2 stroke

    ???-----The intake ports on the 7.5 are smaller !
  13. R

    Overide spring ?

    Correct----The spring keep choke plates from moving at full throttle.
  14. R

    1st time buying old boat

    There is absolutely nothing wrong with the concept of hydro-electric shift.----Elegantly simple and reliable.----Just not well understood by folks today.
  15. R

    2000 30hp Johnson possible water restriction/over heats

    The water passage to the block is cast in place in the exhaust housing..----Just a more " modern " looper design.----A very strong motor with a slightly different version of a 70 HP crankshaft.----Same main bearings as the 70 HP.
  16. R

    1981 Mercury 7.5 2 stroke

    The 7.5 ( COMET ) model has smaller intake ports than the 9.8 version.-----Throttle does not need to be open for a compression test.------Remove bypass cover to look for possible piston / ring damage if you feel compression is low.
  17. R

    2000 30hp Johnson possible water restriction/over heats

    I doubt you can pull the exhaust cover on this motor !----There is not one.
  18. R

    2000 30hp Johnson possible water restriction/over heats

    The lower unit should slide into place.-----Never use the bolts to pull it together.-----If the oil mixing unit is still in use , take it off and throw it away.
  19. R

    1st time buying old boat

    Just zoomed in on the control box.-----Boat in post #1.-----Appears to have a throttle and shift cable.----Not electric shift and 73 or newer motor.
  20. R

    2000 Johnson 70 j70plsis

    What item # is 350943 and on what parts page ?-----To me it looks like it was machined ( error ) and let go by inspection.----In 2000 there were issues with OMC as company was in trouble.
Top