Search results

  1. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    More work and pics Drilled and installed a Magnesium anode on the skeg of the motor. Verified I showed grounding from the motor to the Hull Installed the cap on to the EZ Fill pickup I added for the livewells. Reading up on it, I also drilled a hole in the top to allow air out. Read that...
  2. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Now that the boat is mostly assembled, I noticed that the springs seem to be a little light... What are ya'lls thoughts? I would think they should have more "bow" in them....
  3. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 2 Picture of aerator installed. It has outputs for two tanks. So I can run both tanks at the same time. I only had one air hose plugged in at the time of picture Picture of the splashwell 98% complete. I will probably add some extra foam under the splashwell. Also, undecided on how...
  4. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Howdy All, Got some time over the last couple weekends. Getting really close!!!! Added a temp sender to the powerhead. Now it won't just be a horn letting me know if there are issues... Finished the install of the water/fuel seperator. Also completed the install for the trim tilt...
  5. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    I had given my welder the below plans and some templates for the bow. He came over a couple times to measure and test fit the piece before final welding/assembly. If I used a "normal" shop I doubt they would have come over and taken the time that my guy did. So really happy with how they...
  6. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 2 With the garage "clean".... My brother came over and helped me mount the motor. As you can tell, OSHA would be very happy with our setup... First time in 2 1/2 years the boat has had a motor on her!!!! I was super excited and she is finally starting to looks like a real boat...
  7. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Got some time since I last post to do some more work over a couple days. Decided it was time to get the motor out, so started moving some stuff around in the garage. Eventually got the lower unit off and out for inspection again. Last time I ran it I was getting water in the lower unit even...
  8. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 2 The electrical outlet allowed a little to much movement when trying to plug in... So i modified the adapter with some JB Water Weld to make a perfect mold. No movement now Prepping the adapters for the Fuel/Water filter. You will notice I had to modify/cut down one of the adapters so...
  9. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 1 of 2 Back at it again. Slow progress, but progress is progress..... Built the front seat section cushions that I put the snaps in earlier for (Will talk about that later)..... Took a pool noodle and cut it in half. Used a solo cup to make a crude jig. ​​​​​​​Epoxied some 3/4...
  10. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Soooo, got back out of the hospital again after an 11 day stay this time.... Think we have my issue under control and I can continue to slowly recover. Before going back in and since coming back out have been able to do a little, so here are the updates I have: Thanks astor / oldrem I was...
  11. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Had my little Admirals (daughter) 4th Birthday this weekend!!! So didn't get a lot done. Really pushing to try and get this done as she wants to go to the beach. Spent time polishing up the rod holders that I kept from the tear down. You can see the before and after. Didn't use the wire...
  12. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 2 so I can continue to post pictures I didn't realize until after i installed the consoles that the inner gunwale trim was also riveted between the edge and the consoles.... So i had to cut out the section would go between the two so it would fit Only took one picture, but used my wire...
  13. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Thanks all, I just put in my order with them for 36 ft of Wefco rub rail 0101G. I measured 34, but always good to have some wiggle room. On another note, had a three day weekend so got to work quite a bit on the boat. As always, it takes a lot longer then what was planned to do somethings...
  14. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Part 2 cont... Installed the gunwales with temporary screws to shape the boat. The brought out the trim and matched up the holes where the original 3/16th rivets went through and used those holes. That way I wouldn't be having to drill out rivets I accidentally put in them when installing the...
  15. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Finally able to get back working on the boat. Had a medical issue that took me out for awhile and helps explains me being so tired over the last 6 months to a year. Still recovering but, have enough energy to work on the boat as long as I take it slow. Updates below I had to modify one of...
  16. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Starting to look at rub rails and think I found one that will fit... But not sure. Anyone have experience with replacing the rub rails on a SS16? From my measurements Taco V12-4144 might work, but didn't know if anyone else had experience with it or had other suggestions. The opening on the...
  17. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Updating missing photo
  18. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Well after ya'lls comments on the mounts, I decided that was the best way to go. I created some and added them along the gunwales (5 in total). 5200 and solid rivets through them to keep them in place
  19. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Howdy All, Been awhile since I posted anything. Been a busy last couple of months. Got the splashwell from my welder and dry fitted into the boat. Took a couple times for my welder and I to get it to fit right. Didn't account for some slant in the floor or the transom. Nothing is ever...
  20. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Still working slowly but surely. This is a combination of two weekends to cut everything out and dry fit. Did a lot of measuring and remeasuring to get everything as close as possible. Made a template out of cardboard for the front of the consoles. I was happy with how they came out. I...
Top