Search results

  1. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    I got some time to work on the boat before the party on the 4th Created a jig and then made back plates for the cleats I will be installing. Will be coating with epoxy to protect them Sample of the four cleat placements Also, the picture of the LED's I have installed. They are much...
  2. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Got some more work done this weekend Installed the bilge outlet. Didn't quite get the squeeze out i wanted from the 5200 to make a nice circle, but know it is in the areas that count to prevent water intrusion Installed the Attwood Fuel vent. Got the right amount of squeeze out on this one...
  3. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    BWR1953 Mine is similar; however, I don't remember it running the full length of the gunwales. It stopped at the console and then continued again on the other side. I don't know if this was a previous mod by original owner during a restore or if factory. I will have to go back and look at...
  4. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    I haven't had a chance to work on the boat in the last couple weeks. Finally got some time to sneak out and finally posting progress. Read that people have issues taking the seat mounts out after some time. Below is a before shot and after shot of buffing. Before After Added some...
  5. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Thanks Guys, moving a long and really happy with the progress. oscarvan Its standard CDX that I covered with Blue Fasco Epoxy. Decided to give it a try and document its use for future rebuilds. Thus far it hasn't been bad for the price point. You can find some more information on the...
  6. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Been almost a month since I was able to do any real work. Was able to do final prep and then install of flooring as detailed below: Installed and Epoxied T nuts for bottom of chairs Took the time to retap all the threads to make sure no interference when doing install Did final install of...
  7. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Thanks guys, following the recommendation and spent time making the joiners. Also, made a change to the seating arrangements. Decided to use one of the joiners as a seat pedestal near the aft. So we will seat 3 in the back vs the 4 originally planned. Will also be used as an adjustable...
  8. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Got some work done over the last couple days. After a lot of debating with myself, I decided not to go with the self contained ratchets that others have used. I really liked the idea of having them, but couldn't figure out a good way to properly mount them on this trailer. My next build will...
  9. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Other plans got postponed so got to do some work this weekend. Installed all the bolts (except one). Squirted 5200 into the hole before liberally adding it to each screw to make sure I got it all over the interior of the transom to protect it. I would not want to be the person that tries...
  10. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Well guys, it has been a while since I had any updates. Been a little slow moving recently. Other projects/family taking up time. Followed WM's suggestion and used JB Water Weld to fill where the epoxy I used didn't fill to the top. It will prevent water from sitting in the holes and...
  11. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Here is my first draw up for the under flooring tank. Going to send this off to Moeller, better explanation of what I am looking for vs what I initially requested. Hopefully ya'll can read my chicken scratch
  12. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Tell me about it. All in all it wasn't to bad, but will see how it holds up over time. See if my prep was good enough or if the SE was needed. On another note, got the boat back on her trailer!!!! Then my dad noticed that a couple sections were tacky...
  13. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Thanks WM Here are some pics without all the paper
  14. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    So with the new epoxy mixed with 6oz of pigment vs 4 oz and two coats later you can see the difference. Washed with vinegar, then sanded with 220, and a wipe down of acetone (Not shown) before painting new coats as it had been a week since my last coat You can see the difference between...
  15. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Got my order of Fasco Epoxy in yesterday; however, the more exciting news is we got SNOW!! I know its nothing like up North, but for Houston it is a big deal. Will be gone by lunch but it was fun while it lasted. Admiral and First Mate making a Snow Man
  16. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    As promised, here are the pictures I took of the boat. You can definitely see the difference between coat 4 and coat 8. Been using a foam roller which applies the epoxy much thinner than if I had used a nap hence why I am able to have so many layers without fear of to much build up. 4 coats...
  17. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    I am having some issues with the color as you said. I have reached out to Fasco to see if I double the amount of pigment in the epoxy, if it will give me the coverage/color I want. Here in Houston, Holiday parties have snow brought in for the kids to play in!!!! Picture from Tomball (N...
  18. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Put a top on her last night. Plan on starting to paint the blue tonight. You will note the thin white lines I left to paint over so to have a nice transition from white to blue, hope it works out. Also, feels like Winter here, will be a high of 80 degrees today......
  19. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Over Thanksgiving I was able to start painting Side view of skirt (Wasn't able to get a full front picture with the skirt. I had already done my final prep work and was about to paint. Didn't want to open the garage and any little contaminants fall on the clean surface After two days of...
  20. SHSU

    1984 Starcraft 16ft Glutton for Punishment [Splashed July 2019]

    Finally got some time to post updates. Since I added the new drain plug, I decided to cut off the old one. I will have my live well feed through it Before After Fill the crack I had on the Keel with JB Water Weld Before After: I didn't take a close up of the final sanding. You can...
Top